ETS is the largest center for the repair and restoration of units and spare parts of the engine group in the following locations:
- United Arab Emirates
- Dubai
- Sharjah
- Abu Dhabi
- Ajman
- Fujairah
- Ras al-Khaimah
- Umm al-Quwain
- Oman
- Qatar
- Saudi Arabia
- Iran
- USA
- Europe
Services of our service center:a
- Parts repair
- Restoration and sale of short blocks and cylinder heads
- Sales of units
Now an overview of each category:
Repair (restoration of nodes)
We professionally offer you the following services for the repair of your gasoline and diesel engine, both equipped with a turbine and a compressor. Our repair shop is equipped with the most modern equipment, and our specialists have many years of experience and are ready to help even in the most difficult cases.
Cylinder head repair
- Washing - we clean the product from external deposits, which will allow us to proceed to the next stage
- Troubleshooting - We disassemble the entire assembly, inspect each component and reject parts subject to defects
- Leak test of the water channels of the cooling system - a common test
- Grinding the plane - allows you to return the head to subsequent operation
- Inspection of valve guides and bushings - we exclude increased oil consumption
- Replacing the valve stem seal and lapping the valves - returning the head to factory settings
- Engine Block Repair
- Washing - allows you to see all the cracks and deformations
- Boring for piston repair size - a quick way to restore cylinders for a piston in 1 day and bring it back to life
- Sleeve - if the repair size tolerance is exhausted - then We will install new sleeves and return the unit to factory parameters
- Restoration of the crankshaft bed - if the shaft breaks or the bearing shells rotate, the crankshaft bed in the cylinder block suffers. We fix it or install repair bearings with Over size +1 - and you get a finished product.
- Surface processing - if the block is overheated or deformed, it is impossible to guarantee the tightness of the cooling system. In this case, the plane is processed for evenness.
Crankshaft repair
- Straightening (editing) - We remove the curvature and runout of the axis of the shaft
- Grinding main and support journals to the required bearing size (STD, 0.25, 0.5, 0.75, 1.0)
- In case of minor flaws, a half-liter is performed
Welding (crack repair)
- We perform welding on all types of metal and can bring almost any engine back to life
- Hardfacing of crankshaft in standard size
- Welding of the bed of the crankshaft and camshaft
Sale and recovery of short blocks
Turning to us for a finished product, you get complete confidence in the high quality of the product! When carrying out work, we use only proven auto parts. We also provide warranties on all products.
When preparing the short block, we carried out the following recovery operations:
- The cylinder block has been checked for leaks and the cylinders have been bored out to 0.5 gauge (or a new STD liner has been installed)
- Each connecting rod and its top and bottom heads are checked
- The crankshaft is ground and thrust bearings are selected
- Finishing wash and assembly in progress
New (rebuilt) engine
If you are interested in buying a remanufactured engine, then this direction is completely open and transparent with us. We have described all the stages of the work above! The warranty is 3 months - only for spare parts, excluding installation, transportation and downtime costs. When assembling the engine, we use the following new parts from the manufacturer "ALL4Motors":
- We install brand new pistons with pins and retainers of repair 0.50 or standard size
- Complete set of piston rings
- Set of main and connecting rod bearings (STD / 0.25 / 0.50)
- New Timing Chain Kit
- Full set of motor gaskets
We carry out the following repairs:
- We sharpen the block under the piston
- Pressing the head with excessive pressure and milling the plane
- We carry out adjustment of the valves of the inlet and outlet series
- The crankshaft is checked for runout and ground to the required size.
- New seals and gaskets are installed
We highly recommend professional installation for all products we sell, installation instructions are not included with any product.
WE sell spare parts for the restoration of the unit and its components of such brands as: Aud, Porsche, Brilliance, NIO, Evolute, Lancia, Foton, Soueast, SsangYong, Xpeng, Rover, Cadillac, Denza, Iveco, Zotye, Toyota, DW, Acura, Rolls-Royce, Hyundai, Vortex, Hafei, Plymouth, BAW, Haval, Chevrolet, Honda, Nissan, Zeekr, Volvo, Ram, Rimac, Mitsuoka, Mitsubishi, McLaren, Genesis, Jeep, Changan, Changhe, Maserati, Scion, Pontiac, Mercury, Lexus, Maybach, Dodge, Renault, Polestar, Citroen, Isuzu, GAC, SEAT, Smart, Opel, FAW, Tianma Tankv Voyah, Skodav Saturn, Tesla, Subaru, Dacia, Landwind, Luxgen, Suzuki, Mercedes-Benz, TATA , Buickv Khodro, Roewe, Mazda, Lucid, Lincoln, Datsun, Lamborghini, HiPhi, Geo, Great Hongq, MG, Infiniti, Haima, Ravon, Volkswagen, Shuanghuan, Jaguar, Chrysler, Hower Marussia Ford Tianye, BYD, Ferrari, Piaggio, Lifan, Hummer, Bugatti, Hawtai, Geely, Dadi, ZX, Omoda, Chery, Peugeot, Lotus, Dongfeng, Daewoo, BMW, GMC, Kia, Exeed, Derways, Hozon, Mini, JAC, Daihatsu, Skywell Bentle y, Weltmeister, Rivian.
We are always happy to provide detailed advice and assistance in the purchase or repair of any auto parts.